Parylene Coating Blog by Diamond-MT

How Long Does the Parylene Coating Process Take?

Posted by Sean Horn on Fri, Nov 20, 2015 @ 07:39 AM

Parylene Chemistry and Production Requirements

Read More

Tags: parylene, parylene coating process, parylene uniformity

Managing Parylene Adhesion

Posted by Sean Horn on Tue, Sep 10, 2013 @ 10:39 AM

It is imperative to obtain proper adhesion of the coating to the substrate in order to truly reap the benefits of parylene conformal coating. Poor parylene adhesion, after all, can negate some of parylene's most-prized properties, including corrosion resistance, chemical resistance, moisture resistance, and dielectric strength. So, it's in an engineer's best interest to understand the importance of parylene adhesion and how to obtain it.

Read More

Tags: parylene, parylene coating process, parylene adhesion

Parylene vs Acrylic Conformal Coatings

Posted by Sean Horn on Wed, Feb 13, 2013 @ 02:34 PM

Parylene and acrylic resins are both conformal coatings.  Most of the similarities stop there.  Because their properties vary so much, they have their own unique uses and capabilities.

Read More

Tags: acrylic conformal coating, parylene, dip coating equipment, parylene cost, parylene conformal coating, parylene coating process

What is the maximum object size for parylene coating?

Posted by Sean Horn on Mon, Feb 11, 2013 @ 11:00 AM

People often wonder if their project can be parylene coated.  While there are huge list of items that can be coated with parylene, there are some limitations.  One of these limitations is size.

Read More

Tags: parylene, parylene conformal coating, parylene coating process, parylene deposition

Parylene Disadvantages

Posted by Sean Horn on Wed, Oct 17, 2012 @ 09:51 AM

Parylene offers the best protection against solvents of any conformal coating.  It is also brings to the table excellent moisture and gas protection, very high dielectric strength, and is bio-compatible.  Even with all of these benefits, there are still some disadvantages to using parylene versus other conformal coatings.

Read More

Tags: parylene, parylene cost, parylene conformal coating, parylene coating process, parylene properties, parylene adhesion, parylene disadvantages

How much does parylene cost?

Posted by Sean Horn on Wed, Aug 29, 2012 @ 03:15 PM

Everyone loves the barrier properties of parylene.  The resistance to solvents and moisture, incredible dielectric strength, and the completely uniform coverage are enough to make any engineer squeal with delight.  The question that immediately follows is, “How much does parylene cost?” 

There are a couple different factors that go into decided parylene cost.  One of these factors is the material cost.  Parylene dimer can be anywhere from $100 to $10,000+ per pound depending on the type and quality.  Other raw materials, such as the cleaning materials and adhesion promotion mediums, also factor into the materials costs for parylene.

Read More

Tags: parylene, parylene cost, parylene conformal coating, parylene coating process, parylene dimer, parylene properties

Parylene-Enabled Flexible Prosthetic Devices: A Review

Posted by Sean Horn on Fri, May 25, 2012 @ 06:10 AM

The focus of this paper was the flexible electrode and flexible coil components in which parylene C is used not simply as a coating, but as the structural material as well.  Parylene C was chosen as the structural material because parylene is pinhole-free, uniformly conforming, its low water permeability, its USP Class VI biocompatibility, and its high flexibility and mechanical strength.
Read More

Tags: parylene, parylene conformal coating, parylene coating process, Medical conformal coatings, implantable devices, medical parylene

Typical Conformal Coatings Used

Posted by Sean Horn on Thu, May 10, 2012 @ 08:59 AM

Different conformal coatings have a wide range of uses throughout many different industries.  While originally founded for the electronics industry, because of the benefits of using conformal coatings, it has branched into many other fields most notably medical, automotive, and LED.

 Medical Conformal Coatings Used

 While all conformal coating types can be used for different applications, for many medical devices, parylene is the way to go.  Because parylene is biologically inert, FDA approval of parylene coated devices is well-documented. The coatings comply with USP Class VI plastics requirements and are MIL-I-46058C / IPC-CC-830B listed.  Another benefit for medical devices such as stents and catheters is that parylene is entirely conformal, meaning that component configurations with sharp edges, points, flat surfaces, crevices or exposed internal surfaces are coated uniformly without voids or pinholes.

Read More

Tags: parylene conformal coating, parylene coating process, Diamond-MT, conformal coating, silicone conformal coating, conformal coatings, LED conformal coating, Automotive conformal coatings, Medical conformal coatings, conformal coating standards