Diamond MT is an internationally recognized provider of conformal coating services, including equipment for implementing conformal coating processes.
Read More
0 Comments Click here to read/write comments
Tags: dip coating equipment, conformal coating equipment, parylene equipment, parylene coating equipment
A variety of coating equipment is available for use in the conformal coating process. The most important for liquid coatings are described below.
Read More
0 Comments Click here to read/write comments
Tags: conformal coating, conformal coating equipment, automated conformal coating robot, conformal coating spray
There are a lot of different pieces of
conformal coating equipment. Each one of them has their own unique purpose and drying cabinets are no different. The three main uses of drying cabinets are to extract air from around the assemblies, hold the assembly still during curing, and to protect the card from damage.
Read More
1 Comment Click here to read/write comments
Tags: conformal coating, conformal coatings, conformal coating equipment, conformal coating solvents, drying cabinet, solvents
Stripping or removal of unwanted conformal coating from a printed circuit board (PCB) can be a relatively simple process or a very messy difficult job. It does depend on several factors including the type of conformal coating you need to remove, where the coating is found and the type of components on the board.
2 Comments Click here to read/write comments
Tags: conformal coating, conformal coatings, conformal coating equipment, conformal coating removal, conformal coating rework, conformal coating types
Last time, we discussed the general requirements necessary to open a conformal coating facility. Now I will discuss the equipment that is required in order to have a properly operating facility.
0 Comments Click here to read/write comments
Tags: conformal coatings, conformal coating standards, conformal coating equipment, conformal coating process, conformal coating machines, spray booth, drying cabinet, inspection booth
0 Comments Click here to read/write comments
Tags: conformal coating, conformal coating equipment, Nexus3C
There are many benefits to using a spray robot for
conformal coating. As always, there are some potential issues that need to be addressed prior to committing to a spray robot such as the
MACCS 400.
Read More
One potential issue with considering selective conformal coating with a robotic conformal coating system is misaligned components on the PCB which can potentially damage the spray heads which are moving along a set pattern on the board and the components themselves be damaged as they travel. Spray heads are one of the most critical parts on the spray robot. Repairing damage can get costly.
0 Comments Click here to read/write comments
Tags: conformal coating, conformal coating equipment, conformal coating machines, conformal coating masking, conformal coating rework, MACCS 400
Diamond-MT is proud to announce that it will be exhibiting at the Showcase for Commerce in Johnstown, Pa through May 23-24, 2012. Diamond-MT will be featuring its parylene coating services and conformal coating services as well as conformal coating equipment and consultation and training services.
0 Comments Click here to read/write comments
Tags: Diamond-MT, conformal coating equipment, conformal coating trade shows, conformal coating service, parylene coating service, About Us
A typical conformal coating selective robotic spray process consists of a programmable XYZ coordinate platform with a valve or valves attached to a controllable arm, depositing coating onto a printed circuit board in areas specified by the programmers of the system. An example of this system is the
MACCS 400.
Read More
Technology varies between the platforms and the valves but essentially they achieve the same result. The goal is to deposit coating where you want it, removing the issue of masking which is required in batch processing with dip or spray booths.
1 Comment Click here to read/write comments
Tags: conformal coating, conformal coating equipment, conformal coating machines, automated conformal coating robot, MACCS 400
Diamond-MT is proud to announce that it will be exhibiting at MD&M East in Philadelphia through May 22-24, 2012. Diamond-MT will be featuring its parylene coating services and conformal coating services as well as conformal coating equipment and consultation and training services.
0 Comments Click here to read/write comments
Tags: Diamond-MT, conformal coating equipment, conformal coating trade shows, conformal coating service, parylene coating service
