Parylene Coating Blog by Diamond-MT

All about the Conformal Coating Process

Posted by Sean Horn on Fri, Jun 02, 2017 @ 07:40 AM

Liquid application resins acrylic, epoxy, silicone and urethane are applied to electronic circuitry in a liquid format by brush, dip or spray techniques, either manually or through robotic processes; they require curing before they can be used. 

Read More

Tags: conformal coating, conformal coatings, conformal coating process, conformal coating masking, conformal coating methods

Which Conformal Coating Is Right for Me?

Posted by Sean Horn on Fri, May 19, 2017 @ 07:30 AM

          The value of polymeric conformal coatings for protecting printed circuit boards (PCBs) from functional retardants like dust, corrosion, moisture, and temperature fluctuations has been well-documented.  Conforming to the physical configurations of the exposed face of the PCB, conformal coating:

Read More

Tags: acrylic conformal coating, parylene, conformal coating, silicone conformal coating, urethane conformal coating

Nano Coating vs Parylene

Posted by Sean Horn on Fri, Feb 24, 2017 @ 08:00 AM

Although its basic component is remarkably small – with 25,400,000 nanometers included in just one inch(!!) -- nanotechnology encompasses a growing, interdisciplinary field with an unlimited future.  Nanowires and nanotubes are used in transistors for printed circuit boards (PCBs) and associated electronic assemblies.  Bio-nanobatteries, capacitators, LCDs, and microprocessors represent just a few nano-applications, which include uses for aerospace, agricultural, automotive, consumer, industrial, medical, military and oceanic products. 

Read More

Tags: parylene, parylene properties, conformal coating, parylene disadvantages, nano coating

Cracking in Conformal Coating:  Major Causes and Preventative Strategies

Posted by Sean Horn on Fri, Feb 10, 2017 @ 07:45 AM

Conformal coatings protect printed circuit boards (PCBs) and similar electronic assemblies used for a wide range of aerospace, automotive, consumer, defense and medical applications.  Coatings effectively cover PCBs, shielding them from contaminants, liquid incursions, temperature fluctuations and other conditions potentially hazardous to component performance.  However, problems can develop if their preparation, application, and drying processes are inappropriately managed. 

Read More

Tags: conformal coating, conformal coating process, conformal coating rework, conformal coating issues, conformal coating defects

Nano Coating and Conformal Coating:  A Functional Comparison

Posted by Sean Horn on Fri, Feb 03, 2017 @ 07:37 AM

The engineering of functional systems at the molecular scale, nanotechnology encompasses management of individual atoms, combined into effective working units, often complex as machines.   Yielding advantages like enhanced chemical reactivity and strength than larger-scale structures, they offer greater control of the light spectrum and weigh significantly less.  Incredibly small, one nanometer is a billionth of a meter (10-9 of a meter) -- one inch equals 25,400,000 nanometers; more illustratively, a sheet of newspaper is 100,000 nanometers thick.  

Read More

Tags: parylene, conformal coating, nano coating

Conformal Coating Boots vs Tape:  Making the Right Choice

Posted by Sean Horn on Fri, Jan 27, 2017 @ 07:24 AM

Masking tapes and boots both protect components for a selected range of masking functions.  Choosing between the two is crucial to achieving optimal masking protection.  Conductivity needs to be maintained in all cases.  In addition, such operational factors as the:

Read More

Tags: conformal coating, conformal coatings, conformal coating masking, masking boots

Conformal Coating Masking Boots

Posted by Sean Horn on Fri, Jan 20, 2017 @ 07:29 AM

Conformal Coating Masking Boots

Read More

Tags: conformal coating, conformal coating masking, masking boots

Different Types of Masking for Conformal Coatings

Posted by Sean Horn on Fri, Jan 13, 2017 @ 07:45 AM

Printed circuit boards (PCBs) and related electrical assemblies benefit from the protection of conformal coatings.  However, because the films are insulative when dry, they can disrupt operation of the assemblies’ electrical components, items like capacitors, connector contacts, diodes, operational amplifiers, resistors, or transistors.  Conformal coating masking protects specified regions of PCBs and related assemblies from being conformally coated during film application. These components must remain uncoated to function as designed.  Consisting of masking appliances constructed with appropriate materials, masking systems prevent migration of conformal coatings into designated keep-out areas.  Masking processes enacted prior to coating application assure the conformal materials DO NOT invade designated keep-out areas. 

Read More

Tags: conformal coating, conformal coating masking, masking boots

When to Use Conformal Coating Removal Services

Posted by Sean Horn on Fri, Dec 02, 2016 @ 07:33 AM

It is possible to remove unwanted conformal coatings from PCBs in-shop.  The process can often be accomplished by either the assembly’s original equipment manufacturer (OEM) or an end-user, but the capacity to do so doesn’t always exist.  For these parties, conditions affecting the poor coating may:

Read More

Tags: conformal coating, conformal coating removal, conformal coating rework, conformal coating defects, conformal coating removal services

Removing Conformal Coating Instead of Repairing It

Posted by Sean Horn on Fri, Nov 25, 2016 @ 07:34 AM

Sometimes problems with conformal coating are too complicated or difficult to repair.  This can occur when bubbles develop in the coating during the application process; bubbles cause voids in the coating that defeat its protective, insulating purpose, suggesting the need for removal.  Other situations that lead to inadequate coverage, and may favor coating removal, rather than repair include: 

  • Coating application that’s either too thick or thin for the project’s purposes.
  • Component surface finishes that adapt poorly to the conformal material chosen for coverage.
  • Disparities in surface tension/surface energy.
  • Gravity issues that negatively impact application of liquid coating.
  • Improper mixture of two-part materials.
  • Inadequate fixturing or placement of assembly components in the coating area.
  • Inadequate masking implementation.
  • Incorrect interpretation of coating requirements.
  • Residue on the coating surface during coating application.
  • Poor, uneven coating application.

Overly thick film application or use of coating equipment/materials unsuited to the assignment are major causes of coating problems.  In these cases, complete or partial removal of the conformal film from the PCB may be the best solution. 

Thus, it is important before beginning any conformal coating assignment for designers and users to recognize the various types of conformal coatings and their interactions with the parts/materials they cover, to protect the products in their respective end-use environments, for the expected design-life of each component. 

Industry Standards

             When removal is the best option for your coating problem, it is advisable to consult prevailing industry standards for appropriate process guidelines.  For instance, IPC-7711/7721 delineates recommended procedures for conformal coating removal from, and replacement onto, PCBs.  IPC-A-610 is a widely-held standard for electronic assemblies, offering users limited but valuable criteria for conformal coating applications.   Designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy, IPC-CC-830B qualifies the definition, use and conformance of all conformal coatings types for PCBs.  In most cases, coating removal is required when assemblies don’t meet the requirements of IPC-CC-830, concerning overall quality conformance of each

The Logistics of Coating Removal                                                               

The logistics of coating removal are largely dependent on the type of coating material, its position on the PCB, and the board’s components.  Proper identification of the coating material, and the methods used for its original application, are essential to correct determination of the removal method.  Once these have been identified, determination of the appropriate removal method can be achieved. 

In many cases, chemical strippers can dissolve conformal coatings from PCBs.  Acrylic films are typically removed easily by soaking in a solution of stripping fluid, followed by mild mechanical abrasion if necessary.  These two processes also work for coatings such as epoxy, silicone and urethane; however, since these substances have higher levels of chemical resistance than acrylic, complete coating removal is more difficult and time-consuming.  In all cases, the stripping solution’s compatibility with the PCB’s components needs to be verified to minimize potential damage during the removal process.

Chemical removal does the least damage to PCBs; it is effective for the liquid coatings -- acrylic, epoxy, silicon and urethane.   Chemical methods work less well for parylene films, since the substance is chemical inert.  Abrasion, laser, mechanical, plasmatic and thermal removal methods are more successful for parylene films; they also work for liquid coatings in many cases.

Recently applied coating is more easily detached from substrate surfaces than older coatings, regardless of the material, unless the coating itself has begun to decay with age.  Larger areas of the board respond best to complete submersion in a tank of stripping fluid.  Gentle abrasion using a soft bristle brush will also eradicate coatings.  


Please remember that the removal of conformal coating generally requires use of exceptionally caustic and potentially dangerous chemicals; the safety of process operators, the product being treated and the immediate environment can be jeopardized by use of inappropriate  removal materials and methods.  Consultation with a certified conformal coating specialist is highly recommended prior to removing conformal coating.  To this end, the professionals at Diamond MT are eminently qualified, and would be glad to be of assistance.

To discover more about conformal coating rework and removal, download our whitepaper now:

Conformal Coating Rework  Whitepaper

Read More

Tags: conformal coating, conformal coating removal, conformal coating rework, conformal coating defects